Vial to Units

Semaglutide Calculator

Convert a dose of Semaglutide into syringe units. Enter the vial size, the bacteriostatic water added and the dose on your prescription.

mg
mL

Enter the vial size and the water you added.

Arithmetic only. This tool does not recommend a dose; use the one your prescriber gave you.

About Semaglutide

Semaglutide is a GLP-1 receptor agonist.

FDA-approved as a prescription medicine (Ozempic, Wegovy, Rybelsus). Compounded versions are not FDA-approved.

Ozempic and Wegovy injections are pre-filled pens that need no reconstitution and no separate syringe; Rybelsus is a tablet. This calculator applies only to semaglutide dispensed as a powder vial, or as a solution with a stated mg/mL on the label.

Semaglutide concentration chart

Concentration for common vial sizes at 1, 2, 3 and 5 mL of water, with the amount held in every 10 units of a U-100 syringe.

Vial1 mL water2 mL water3 mL water5 mL water
2 mg2 mg/mL · 0.2 mg (200 mcg) per 10 units1 mg/mL · 0.1 mg (100 mcg) per 10 units0.6667 mg/mL · 0.06667 mg (66.67 mcg) per 10 units0.4 mg/mL · 0.04 mg (40 mcg) per 10 units
3 mg3 mg/mL · 0.3 mg (300 mcg) per 10 units1.5 mg/mL · 0.15 mg (150 mcg) per 10 units1 mg/mL · 0.1 mg (100 mcg) per 10 units0.6 mg/mL · 0.06 mg (60 mcg) per 10 units
5 mg5 mg/mL · 0.5 mg (500 mcg) per 10 units2.5 mg/mL · 0.25 mg (250 mcg) per 10 units1.667 mg/mL · 0.1667 mg (166.7 mcg) per 10 units1 mg/mL · 0.1 mg (100 mcg) per 10 units
10 mg10 mg/mL · 1 mg per 10 units5 mg/mL · 0.5 mg (500 mcg) per 10 units3.333 mg/mL · 0.3333 mg (333.3 mcg) per 10 units2 mg/mL · 0.2 mg (200 mcg) per 10 units

Units per 1 mg of Semaglutide

How many units on a U-100 syringe hold 1 mg, for each vial size and water volume. 1 mg is a round reference amount for scaling, not a dose: multiply or divide to match the dose on your prescription, or use the calculator.

Vial1 mL water2 mL water3 mL water5 mL water
2 mg50 units100 units150 units · over 1 mL250 units · over 1 mL
3 mg33.33 units66.67 units100 units166.7 units · over 1 mL
5 mg20 units40 units60 units100 units
10 mg10 units20 units30 units50 units

Semaglutide dispensed as a liquid

Some pharmacies dispense Semaglutide already in solution, with the concentration printed on the label as mg/mL. No water is added, so the label figure is the concentration. The rows below are example label concentrations; use the one on your vial. The columns show how much each syringe marking holds, and the marking that holds 1 mg, a round reference amount rather than a dose.

Label concentrationIn 1 unitIn 10 unitsIn 50 units1 mg =
1 mg/mL0.01 mg · 10 mcg0.1 mg · 100 mcg0.5 mg · 500 mcg100 units
2 mg/mL0.02 mg · 20 mcg0.2 mg · 200 mcg1 mg50 units
2.5 mg/mL0.025 mg · 25 mcg0.25 mg · 250 mcg1.25 mg40 units
3 mg/mL0.03 mg · 30 mcg0.3 mg · 300 mcg1.5 mg33.33 units
5 mg/mL0.05 mg · 50 mcg0.5 mg · 500 mcg2.5 mg20 units
10 mg/mL0.1 mg · 100 mcg1 mg5 mg10 units

More concentrations: mg/mL to units chart.

Questions

How do I calculate Semaglutide units on a syringe?

Divide the mg in the vial by the mL of water added to get mg/mL. Divide your prescribed dose by that figure for mL, then multiply by 100 for units on a U-100 syringe. For example, a 3 mg vial with 2 mL of water is 1.5 mg/mL, so every 10 units holds 0.15 mg (150 mcg).

How many units is 1 mg of Semaglutide?

It depends on the vial size and the water added. With a 3 mg vial, 1 mg is 33.33 units after 1 mL of water, 66.67 units after 2 mL of water, 100 units after 3 mL of water. The lookup table above covers the other vial sizes.

Is Semaglutide measured in mg or mcg?

Semaglutide vials are labelled in mg. If your prescription is written in mcg, divide by 1,000 to get mg, or switch the dose field to mcg. In a 3 mg vial mixed with 2 mL, one unit on the syringe holds 0.015 mg (15 mcg).

Does this calculator apply to Ozempic and Wegovy pens?

Ozempic and Wegovy injections are pre-filled pens that need no reconstitution and no separate syringe; Rybelsus is a tablet. This calculator applies only to semaglutide dispensed as a powder vial, or as a solution with a stated mg/mL on the label.

My Semaglutide vial is already a liquid. How do I calculate units?

Use the mg/mL printed on the label. Divide the dose in mg by that figure for mL, then multiply by 100 for units. In the calculator, enter the mg/mL as the amount in the vial and 1 mL as the water. At 2 mg/mL, every 10 units holds 0.2 mg (200 mcg).

How much bacteriostatic water do I add to Semaglutide?

Follow the amount on your pharmacy label. The volume of water does not change how much Semaglutide is in the vial; it only changes how many units a given dose takes up. Enter whatever amount was actually added.

What Semaglutide dose should I enter?

The dose written on your prescription. This page converts a dose into syringe units and does not recommend one.

Related conversions

Other calculators

GLP-1 and related, and a few others.