CJC-1295 / Ipamorelin blend Calculator
Convert a dose of CJC-1295 / Ipamorelin blend into syringe units. Enter the vial size, the bacteriostatic water added and the dose on your prescription.
Enter the vial size and the water you added.
Arithmetic only. This tool does not recommend a dose; use the one your prescriber gave you.
About CJC-1295 / Ipamorelin blend
CJC-1295 / Ipamorelin blend is a single vial containing both CJC-1295 and ipamorelin.
Not FDA-approved for any use.
CJC-1295 / Ipamorelin blend concentration chart
Concentration for common vial sizes at 1, 2, 3 and 5 mL of water, with the amount held in every 10 units of a U-100 syringe. Figures are for the CJC-1295 component; in an equal-parts vial the Ipamorelin figures are the same.
| Vial | 1 mL water | 2 mL water | 3 mL water | 5 mL water |
|---|---|---|---|---|
| 5 mg / 5 mg | 5 mg/mL CJC-1295 · 0.5 mg (500 mcg) per 10 units | 2.5 mg/mL CJC-1295 · 0.25 mg (250 mcg) per 10 units | 1.667 mg/mL CJC-1295 · 0.1667 mg (166.7 mcg) per 10 units | 1 mg/mL CJC-1295 · 0.1 mg (100 mcg) per 10 units |
| 10 mg / 10 mg | 10 mg/mL CJC-1295 · 1 mg per 10 units | 5 mg/mL CJC-1295 · 0.5 mg (500 mcg) per 10 units | 3.333 mg/mL CJC-1295 · 0.3333 mg (333.3 mcg) per 10 units | 2 mg/mL CJC-1295 · 0.2 mg (200 mcg) per 10 units |
Units per 1 mg of CJC-1295
How many units on a U-100 syringe hold 1 mg, for each vial size and water volume. 1 mg is a round reference amount for scaling, not a dose: multiply or divide to match the dose on your prescription, or use the calculator.
| Vial | 1 mL water | 2 mL water | 3 mL water | 5 mL water |
|---|---|---|---|---|
| 5 mg / 5 mg | 20 units | 40 units | 60 units | 100 units |
| 10 mg / 10 mg | 10 units | 20 units | 30 units | 50 units |
Questions
How do I calculate CJC-1295 / Ipamorelin blend units on a syringe?
Divide the mg in the vial by the mL of water added to get mg/mL. Divide your prescribed dose by that figure for mL, then multiply by 100 for units on a U-100 syringe. For example, a 10 mg CJC-1295 vial with 2 mL of water is 5 mg/mL, so every 10 units holds 0.5 mg (500 mcg).
How many units is 1 mg of CJC-1295?
It depends on the vial size and the water added. With a 10 mg CJC-1295 vial, 1 mg is 10 units after 1 mL of water, 20 units after 2 mL of water, 30 units after 3 mL of water. The lookup table above covers the other vial sizes.
Is CJC-1295 / Ipamorelin blend measured in mg or mcg?
Blend vials are labelled in mg. If your prescription is written in mcg, divide by 1,000 to get mg, or switch the dose field to mcg. In a 10 mg CJC-1295 vial mixed with 2 mL, one unit on the syringe holds 0.05 mg (50 mcg).
How does the calculator handle two peptides in one vial?
Both are dissolved in the same water, so every draw contains them in the same ratio as the vial. Enter the dose of CJC-1295; the result also shows how much Ipamorelin is in that draw. In an equal-parts vial the two amounts are the same.
How much bacteriostatic water do I add to CJC-1295 / Ipamorelin blend?
Follow the amount on your pharmacy label. The volume of water does not change how much CJC-1295 / Ipamorelin blend is in the vial; it only changes how many units a given dose takes up. Enter whatever amount was actually added.
What CJC-1295 / Ipamorelin blend dose should I enter?
The dose written on your prescription. This page converts a dose into syringe units and does not recommend one.
Related conversions
- 12 units to mg
- 75 units to mg
- 15 units to mL
- 0.3 mL to units
- mcg to mg
- mg/mL to units chart
- All conversions
Other calculators
Blends, and a few others.